#ifndef _USER_CONFIG_OVERRIDE_H_ #define _USER_CONFIG_OVERRIDE_H_ // force the compiler to show a warning to confirm that this file is inlcuded #warning **** user_config_override.h: Using settings override with flavour "sonoff-minimal" /*********************************************************************************************\ * SECTION 1 * - After initial load any change here only take effect if CFG_HOLDER is changed too \*********************************************************************************************/ // -- Wifi ---------------------------------------- #undef STA_SSID1 #define STA_SSID1 "{{ env "WIFI_SSID" }}" // [Ssid1] Wifi SSID #undef STA_PASS1 #define STA_PASS1 "{{ env "WIFI_PASS" }}" // [Password1] Wifi password // -- Ota ----------------------------------------- #undef OTA_URL #define OTA_URL "{{ env "OTA_URL" }}" // [OtaUrl] // -- MQTT ---------------------------------------- #undef MQTT_HOST #define MQTT_HOST "{{ env "MQTT_HOST" }}" // [MqttHost] #undef MQTT_USER #define MQTT_USER "{{ env "MQTT_USER" }}" // [MqttUser] MQTT user #undef MQTT_PASS #define MQTT_PASS "{{ env "MQTT_PASS" }}" // [MqttPassword] MQTT password // -- MQTT topics --------------------------------- // %topic% token options (also ButtonTopic and SwitchTopic) #undef MQTT_TOPIC #define MQTT_TOPIC "unconfigured" // [Topic] (unique) MQTT device topic, set to 'PROJECT "_%06X"' for unique topic including device MAC address // -- MQTT - Telemetry ---------------------------- #undef TELE_PERIOD #define TELE_PERIOD 30 // [TelePeriod] Telemetry (0 = disable, 10 - 3600 seconds) // -- Time - Up to three NTP servers in your region #undef NTP_SERVER1 #define NTP_SERVER1 "ptbtime1.ptb.de" // [NtpServer1] Select first NTP server by name or IP address (129.250.35.250) #undef NTP_SERVER2 #define NTP_SERVER2 "ptbtime2.ptb.de" // [NtpServer2] Select second NTP server by name or IP address (5.39.184.5) // -- Location ------------------------------------ #undef LATITUDE #define LATITUDE 53.58328 // [Latitude] Your location to be used with sunrise and sunset #undef LONGITUDE #define LONGITUDE 9.71719 // [Longitude] Your location to be used with sunrise and sunset /*********************************************************************************************\ * END OF SECTION 1 * * SECTION 2 * - Enable a feature by removing both // in front of it * - Disable a feature by preceding it with // \*********************************************************************************************/ // -- MQTT - Domoticz ----------------------------- #undef USE_DOMOTICZ // Enable Domoticz (+6k code, +0.3k mem) // -- MQTT - Home Assistant Discovery ------------- #undef USE_HOME_ASSISTANT // Enable Home Assistant Discovery Support (+2k code) // -- HTTP ---------------------------------------- #undef USE_EMULATION // Enable Belkin WeMo and Hue Bridge emulation for Alexa (+16k code, +2k mem) // -- mDNS ---------------------------------------- #undef USE_DISCOVERY // Enable mDNS for the following services (+8k code, +0.3k mem) // -- Time ---------------------------------------- #undef USE_TIMERS // Add support for up to 16 timers (+2k2 code) // -- Rules --------------------------------------- #undef USE_RULES // Add support for rules (+4k4 code) // -- Internal Analog input ----------------------- #define USE_ADC_VCC // Display Vcc in Power status. Disable for use as Analog input on selected devices // -- One wire sensors ---------------------------- #undef USE_DS18x20 // Optional for more than one DS18x20 sensors with id sort, single scan and read retry (+1k3 code) // -- I2C sensors --------------------------------- #undef USE_I2C // -- Serial sensors ------------------------------ #undef USE_MHZ19 // Add support for MH-Z19 CO2 sensor (+2k code) #undef USE_SENSEAIR // Add support for SenseAir K30, K70 and S8 CO2 sensor (+2k3 code) #undef USE_PMS5003 // Add support for PMS5003 and PMS7003 particle concentration sensor (+1k3 code) #undef USE_NOVA_SDS // Add support for SDS011 and SDS021 particle concentration sensor (+0k7 code) #undef USE_SERIAL_BRIDGE // Add support for software Serial Bridge (+0k8 code) #undef USE_TUYA_DIMMER // Add support for Tuya Serial Dimmer #undef USE_ARMTRONIX_DIMMERS // Add support for Armtronix Dimmers (+1k4 code) #undef USE_PS_16_DZ // Add support for PS-16-DZ Dimmer // Power monitoring sensors ----------------------- #undef USE_PZEM004T // Add support for PZEM004T Energy monitor (+2k code) #undef USE_PZEM_AC // Add support for PZEM014,016 Energy monitor (+1k1 code) #undef USE_PZEM_DC // Add support for PZEM003,017 Energy monitor (+1k1 code) #undef USE_MCP39F501 // Add support for MCP39F501 Energy monitor as used in Shelly 2 (+3k1 code) // -- Low level interface devices ----------------- #undef USE_IR_REMOTE // Send IR remote commands using library IRremoteESP8266 and ArduinoJson (+4k code, 0k3 mem, 48 iram) #undef USE_WS2812 // WS2812 Led string using library NeoPixelBus (+5k code, +1k mem, 232 iram) - Disable by // #undef USE_ARILUX_RF // Add support for Arilux RF remote controller (+0k8 code, 252 iram (non 2.3.0)) #undef USE_SR04 // Add support for HC-SR04 ultrasonic devices (+1k code) #undef USE_HX711 // Add support for HX711 load cell (+1k5 code) #undef USE_RF_FLASH // Add support for flashing the EFM8BB1 chip on the Sonoff RF Bridge. C2CK must be connected to GPIO4, C2D to GPIO5 on the PCB (+3k code) #undef USE_TX20_WIND_SENSOR // Add support for La Crosse TX20 anemometer (+2k code) #undef USE_RC_SWITCH // Add support for RF transceiver using library RcSwitch (+2k7 code, 460 iram) #endif // _USER_CONFIG_OVERRIDE_H_