luzifer/tasmota-build
1
0
Fork 0
mirror of https://github.com/Luzifer/tasmota-build.git synced 2024-12-22 22:01:18 +00:00
Code Issues Releases Wiki Activity

Enable BMP driver in standard image

Browse source 
Signed-off-by: Knut Ahlers <knut@ahlers.me>
This commit is contained in:
Knut Ahlers 2020-07-04 20:23:15 +02:00
parent 9e36ad28c9
commit d2a9808b57
Signed by: luzifer
GPG key ID: DC2729FDD34BE99E
3 changed files with 75 additions and 1 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
Makefile
View file

@ -9,7 +9,7 @@ chown:
ci: full-clean default
build_%: download korvike venv
./korvike -i user_config_override.h -o tasmota/tasmota/user_config_override.h
./korvike -i uco_$*.h -o tasmota/tasmota/user_config_override.h
cd tasmota && ../venv/bin/platformio run -e $*
mkdir -p build
cp tasmota/.pioenvs/$*/firmware.bin build/$*.bin

0
user_config_override.h → uco_tasmota-minimal.h
View file

74
uco_tasmota.h Normal file
View file

@ -0,0 +1,74 @@
/*
user_config_override.h - user configuration overrides my_user_config.h for Tasmota
Copyright (C) 2020 Theo Arends
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _USER_CONFIG_OVERRIDE_H_
#define _USER_CONFIG_OVERRIDE_H_
// force the compiler to show a warning to confirm that this file is included
#warning **** user_config_override.h: Using Settings from this File ****
/*****************************************************************************************************\
* USAGE:
* To modify the stock configuration without changing the my_user_config.h file:
* (1) copy this file to "user_config_override.h" (It will be ignored by Git)
* (2) define your own settings below
* (3) for platformio:
* define USE_CONFIG_OVERRIDE as a build flags.
* ie1 : export PLATFORMIO_BUILD_FLAGS='-DUSE_CONFIG_OVERRIDE'
* for Arduino IDE:
* enable define USE_CONFIG_OVERRIDE in my_user_config.h
******************************************************************************************************
* ATTENTION:
* - Changes to SECTION1 PARAMETER defines will only override flash settings if you change define CFG_HOLDER.
* - Expect compiler warnings when no ifdef/undef/endif sequence is used.
* - You still need to update my_user_config.h for major define USE_MQTT_TLS.
* - All parameters can be persistent changed online using commands via MQTT, WebConsole or Serial.
\*****************************************************************************************************/
// -- Master parameter control --------------------
#undef CFG_HOLDER
#define CFG_HOLDER 4617 // [Reset 1] Change this value to load SECTION1 configuration parameters to flash
// -- Setup your own Wifi settings ---------------
#undef STA_SSID1
#define STA_SSID1 "{{ env "WIFI_SSID" }}" // [Ssid1] Wifi SSID
#undef STA_PASS1
#define STA_PASS1 "{{ env "WIFI_PASS" }}" // [Password1] Wifi password
// -- Setup your own MQTT settings ---------------
#undef MQTT_HOST
#define MQTT_HOST "{{ env "MQTT_HOST" }}" // [MqttHost]
#undef MQTT_PORT
#define MQTT_PORT 1883 // [MqttPort] MQTT port (10123 on CloudMQTT)
#undef MQTT_USER
#define MQTT_USER "{{ env "MQTT_USER" }}" // [MqttUser] MQTT user
#undef MQTT_PASS
#define MQTT_PASS "{{ env "MQTT_PASS" }}" // [MqttPassword] MQTT password
// -- Add more modules ----------------------------
#define USE_BMP
#endif // _USER_CONFIG_OVERRIDE_H_