Enable BMP driver in standard image

Signed-off-by: Knut Ahlers <knut@ahlers.me>

Makefile

@@ -9,7 +9,7 @@ chown:
 ci: full-clean default
 
 build_%: download korvike venv
-	./korvike -i user_config_override.h -o tasmota/tasmota/user_config_override.h
+	./korvike -i uco_$*.h -o tasmota/tasmota/user_config_override.h
 	cd tasmota && ../venv/bin/platformio run -e $*
 	mkdir -p build
 	cp tasmota/.pioenvs/$*/firmware.bin build/$*.bin

uco_tasmota.h

@@ -0,0 +1,74 @@
+/*
+  user_config_override.h - user configuration overrides my_user_config.h for Tasmota
+
+  Copyright (C) 2020  Theo Arends
+
+  This program is free software: you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation, either version 3 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef _USER_CONFIG_OVERRIDE_H_
+#define _USER_CONFIG_OVERRIDE_H_
+
+// force the compiler to show a warning to confirm that this file is included
+#warning **** user_config_override.h: Using Settings from this File ****
+
+/*****************************************************************************************************\
+ * USAGE:
+ *   To modify the stock configuration without changing the my_user_config.h file:
+ *   (1) copy this file to "user_config_override.h" (It will be ignored by Git)
+ *   (2) define your own settings below
+ *   (3) for platformio:
+ *         define USE_CONFIG_OVERRIDE as a build flags.
+ *         ie1 : export PLATFORMIO_BUILD_FLAGS='-DUSE_CONFIG_OVERRIDE'
+ *       for Arduino IDE:
+ *         enable define USE_CONFIG_OVERRIDE in my_user_config.h
+ ******************************************************************************************************
+ * ATTENTION:
+ *   - Changes to SECTION1 PARAMETER defines will only override flash settings if you change define CFG_HOLDER.
+ *   - Expect compiler warnings when no ifdef/undef/endif sequence is used.
+ *   - You still need to update my_user_config.h for major define USE_MQTT_TLS.
+ *   - All parameters can be persistent changed online using commands via MQTT, WebConsole or Serial.
+\*****************************************************************************************************/
+
+
+// -- Master parameter control --------------------
+#undef  CFG_HOLDER
+#define CFG_HOLDER        4617                   // [Reset 1] Change this value to load SECTION1 configuration parameters to flash
+
+// -- Setup your own Wifi settings  ---------------
+#undef  STA_SSID1
+#define STA_SSID1         "{{ env "WIFI_SSID" }}"  // [Ssid1] Wifi SSID
+
+#undef  STA_PASS1
+#define STA_PASS1         "{{ env "WIFI_PASS" }}"  // [Password1] Wifi password
+
+// -- Setup your own MQTT settings  ---------------
+#undef  MQTT_HOST
+#define MQTT_HOST         "{{ env "MQTT_HOST" }}"  // [MqttHost]
+
+#undef  MQTT_PORT
+#define MQTT_PORT         1883                   // [MqttPort] MQTT port (10123 on CloudMQTT)
+
+#undef  MQTT_USER
+#define MQTT_USER         "{{ env "MQTT_USER" }}"  // [MqttUser] MQTT user
+
+#undef  MQTT_PASS
+#define MQTT_PASS         "{{ env "MQTT_PASS" }}"  // [MqttPassword] MQTT password
+
+// -- Add more modules ----------------------------
+
+#define USE_BMP
+
+
+#endif  // _USER_CONFIG_OVERRIDE_H_