mirror of
https://github.com/Luzifer/tasmota-build.git
synced 2024-09-18 18:02:58 +00:00
Rebuild using config-overrides
Signed-off-by: Knut Ahlers <knut@ahlers.me>
This commit is contained in:
parent
c181607592
commit
95b10c087e
GPG Key ID:
DC2729FDD34BE99E
4
.gitignore
vendored
4
.gitignore
vendored
@ -1,3 +1,5 @@
|
||||
build
|
||||
env
|
||||
korvike
|
||||
tasmota
|
||||
venv
|
||||
build
|
||||
|
||||
24
Makefile
24
Makefile
@ -1,4 +1,5 @@
|
||||
TASMOTA_VERSION=v6.2.1
|
||||
TASMOTA_VERSION=v6.3.0
|
||||
export PLATFORMIO_BUILD_FLAGS=-DUSE_CONFIG_OVERRIDE
|
||||
|
||||
default: build_sonoff build_sonoff-minimal
|
||||
|
||||
@ -7,14 +8,14 @@ chown:
|
||||
|
||||
ci: full-clean default
|
||||
|
||||
build_%: download
|
||||
$(MAKE) update_user-config_$*
|
||||
build_%: download korvike venv
|
||||
./korvike -i override_$*.h -o tasmota/sonoff/user_config_override.h
|
||||
cd tasmota && ../venv/bin/platformio run -e $*
|
||||
mkdir -p build
|
||||
cp tasmota/.pioenvs/$*/firmware.bin build/$*.bin
|
||||
|
||||
clean:
|
||||
rm -rf tasmota venv
|
||||
clean final:
|
||||
rm -rf korvike tasmota venv
|
||||
|
||||
download:
|
||||
git clone https://github.com/arendst/Sonoff-Tasmota.git tasmota
|
||||
@ -22,3 +23,16 @@ download:
|
||||
|
||||
full-clean: clean
|
||||
rm -rf build
|
||||
|
||||
korvike:
|
||||
curl -sSfL https://github.com/Luzifer/korvike/releases/download/v0.5.0/korvike_linux_amd64.tar.gz | tar -xz
|
||||
mv korvike_linux_amd64 korvike
|
||||
|
||||
venv:
|
||||
virtualenv -p python2 venv
|
||||
./venv/bin/pip install -r requirements.txt
|
||||
|
||||
.PHONY: venv
|
||||
|
||||
manual:
|
||||
vault2env --key=secret/jenkins/build-tasmota -- bash -eux -o pipefail -c 'env | grep -v PATH > ./env && docker run --rm -i --env-file=env -e UID=$(shell id -u) -v "$(CURDIR):/src" -w /src python:2.7 make ci chown final'
|
||||
|
||||
@ -1,45 +0,0 @@
|
||||
---
|
||||
|
||||
STA_SSID1: '${WIFI_SSID}'
|
||||
STA_PASS1: '${WIFI_PASS}'
|
||||
|
||||
OTA_URL: '${OTA_URL}'
|
||||
|
||||
MQTT_HOST: '${MQTT_HOST}'
|
||||
MQTT_USER: '${MQTT_USER}'
|
||||
MQTT_PASS: '${MQTT_PASS}'
|
||||
MQTT_TOPIC: '"unconfigured"'
|
||||
|
||||
TELE_PERIOD: '30'
|
||||
|
||||
USE_DS18x20: '!undef'
|
||||
|
||||
USE_DOMOTICZ: '!undef'
|
||||
USE_HOME_ASSISTANT: '!undef'
|
||||
HOME_ASSISTANT_DISCOVERY_ENABLE: "0"
|
||||
USE_EMULATION: '!undef'
|
||||
USE_DISCOVERY: '!undef'
|
||||
USE_TIMERS: '!undef'
|
||||
USE_RULES: '!undef'
|
||||
USE_I2C: '!undef'
|
||||
|
||||
USE_MHZ19: '!undef'
|
||||
USE_SENSEAIR: '!undef'
|
||||
USE_PMS5003: '!undef'
|
||||
USE_NOVA_SDS: '!undef'
|
||||
USE_PZEM004T: '!undef'
|
||||
USE_SERIAL_BRIDGE: '!undef'
|
||||
USE_IR_RECEIVE: '!undef'
|
||||
USE_SR04: '!undef'
|
||||
|
||||
NTP_SERVER1: '"ptbtime1.ptb.de"'
|
||||
NTP_SERVER2: '"ptbtime2.ptb.de"'
|
||||
|
||||
USE_IR_REMOTE: '!undef'
|
||||
USE_WS2812: '!undef'
|
||||
USE_ARILUX_RF: '!undef'
|
||||
USE_RF_FLASH: '!undef'
|
||||
|
||||
BE_MINIMAL: '!def'
|
||||
|
||||
...
|
||||
@ -1,30 +0,0 @@
|
||||
---
|
||||
|
||||
STA_SSID1: '${WIFI_SSID}'
|
||||
STA_PASS1: '${WIFI_PASS}'
|
||||
|
||||
OTA_URL: '${OTA_URL}'
|
||||
|
||||
MQTT_HOST: '${MQTT_HOST}'
|
||||
MQTT_USER: '${MQTT_USER}'
|
||||
MQTT_PASS: '${MQTT_PASS}'
|
||||
MQTT_TOPIC: '"unconfigured"'
|
||||
|
||||
TELE_PERIOD: '30'
|
||||
|
||||
USE_DS18x20: '!undef'
|
||||
|
||||
USE_DOMOTICZ: '!undef'
|
||||
HOME_ASSISTANT_DISCOVERY_ENABLE: "0"
|
||||
USE_EMULATION: '!undef'
|
||||
USE_DISCOVERY: '!undef'
|
||||
|
||||
NTP_SERVER1: '"ptbtime1.ptb.de"'
|
||||
NTP_SERVER2: '"ptbtime2.ptb.de"'
|
||||
|
||||
USE_IR_REMOTE: '!undef'
|
||||
USE_WS2812: '!undef'
|
||||
USE_ARILUX_RF: '!undef'
|
||||
USE_RF_FLASH: '!undef'
|
||||
|
||||
...
|
||||
116
override_sonoff-minimal.h
Normal file
116
override_sonoff-minimal.h
Normal file
@ -0,0 +1,116 @@
|
||||
#ifndef _USER_CONFIG_OVERRIDE_H_
|
||||
#define _USER_CONFIG_OVERRIDE_H_
|
||||
|
||||
// force the compiler to show a warning to confirm that this file is inlcuded
|
||||
#warning **** user_config_override.h: Using settings override with flavour "sonoff-minimal"
|
||||
|
||||
/*********************************************************************************************\
|
||||
* SECTION 1
|
||||
* - After initial load any change here only take effect if CFG_HOLDER is changed too
|
||||
\*********************************************************************************************/
|
||||
|
||||
// -- Wifi ----------------------------------------
|
||||
|
||||
#undef STA_SSID1
|
||||
#define STA_SSID1 "{{ env "WIFI_SSID" }}" // [Ssid1] Wifi SSID
|
||||
|
||||
#undef STA_PASS1
|
||||
#define STA_PASS1 "{{ env "WIFI_PASS" }}" // [Password1] Wifi password
|
||||
|
||||
// -- Ota -----------------------------------------
|
||||
#undef OTA_URL
|
||||
#define OTA_URL "{{ env "OTA_URL" }}" // [OtaUrl]
|
||||
|
||||
// -- MQTT ----------------------------------------
|
||||
#undef MQTT_HOST
|
||||
#define MQTT_HOST "{{ env "MQTT_HOST" }}" // [MqttHost]
|
||||
|
||||
#undef MQTT_USER
|
||||
#define MQTT_USER "{{ env "MQTT_USER" }}" // [MqttUser] MQTT user
|
||||
|
||||
#undef MQTT_PASS
|
||||
#define MQTT_PASS "{{ env "MQTT_PASS" }}" // [MqttPassword] MQTT password
|
||||
|
||||
// -- MQTT topics ---------------------------------
|
||||
// %topic% token options (also ButtonTopic and SwitchTopic)
|
||||
#undef MQTT_TOPIC
|
||||
#define MQTT_TOPIC "unconfigured" // [Topic] (unique) MQTT device topic, set to 'PROJECT "_%06X"' for unique topic including device MAC address
|
||||
|
||||
// -- MQTT - Telemetry ----------------------------
|
||||
#undef TELE_PERIOD
|
||||
#define TELE_PERIOD 30 // [TelePeriod] Telemetry (0 = disable, 10 - 3600 seconds)
|
||||
|
||||
// -- Time - Up to three NTP servers in your region
|
||||
#undef NTP_SERVER1
|
||||
#define NTP_SERVER1 "ptbtime1.ptb.de" // [NtpServer1] Select first NTP server by name or IP address (129.250.35.250)
|
||||
|
||||
#undef NTP_SERVER2
|
||||
#define NTP_SERVER2 "ptbtime2.ptb.de" // [NtpServer2] Select second NTP server by name or IP address (5.39.184.5)
|
||||
|
||||
// -- Location ------------------------------------
|
||||
#undef LATITUDE
|
||||
#define LATITUDE 53.58328 // [Latitude] Your location to be used with sunrise and sunset
|
||||
|
||||
#undef LONGITUDE
|
||||
#define LONGITUDE 9.71719 // [Longitude] Your location to be used with sunrise and sunset
|
||||
|
||||
/*********************************************************************************************\
|
||||
* END OF SECTION 1
|
||||
*
|
||||
* SECTION 2
|
||||
* - Enable a feature by removing both // in front of it
|
||||
* - Disable a feature by preceding it with //
|
||||
\*********************************************************************************************/
|
||||
|
||||
// -- MQTT - Domoticz -----------------------------
|
||||
#undef USE_DOMOTICZ // Enable Domoticz (+6k code, +0.3k mem)
|
||||
|
||||
// -- MQTT - Home Assistant Discovery -------------
|
||||
#undef USE_HOME_ASSISTANT // Enable Home Assistant Discovery Support (+2k code)
|
||||
|
||||
// -- HTTP ----------------------------------------
|
||||
#undef USE_EMULATION // Enable Belkin WeMo and Hue Bridge emulation for Alexa (+16k code, +2k mem)
|
||||
|
||||
// -- mDNS ----------------------------------------
|
||||
#undef USE_DISCOVERY // Enable mDNS for the following services (+8k code, +0.3k mem)
|
||||
|
||||
// -- Time ----------------------------------------
|
||||
#undef USE_TIMERS // Add support for up to 16 timers (+2k2 code)
|
||||
|
||||
// -- Rules ---------------------------------------
|
||||
#undef USE_RULES // Add support for rules (+4k4 code)
|
||||
|
||||
// -- Internal Analog input -----------------------
|
||||
#define USE_ADC_VCC // Display Vcc in Power status. Disable for use as Analog input on selected devices
|
||||
|
||||
// -- One wire sensors ----------------------------
|
||||
#undef USE_DS18x20 // Optional for more than one DS18x20 sensors with id sort, single scan and read retry (+1k3 code)
|
||||
|
||||
// -- I2C sensors ---------------------------------
|
||||
#undef USE_I2C
|
||||
|
||||
// -- Serial sensors ------------------------------
|
||||
#undef USE_MHZ19 // Add support for MH-Z19 CO2 sensor (+2k code)
|
||||
#undef USE_SENSEAIR // Add support for SenseAir K30, K70 and S8 CO2 sensor (+2k3 code)
|
||||
#undef USE_PMS5003 // Add support for PMS5003 and PMS7003 particle concentration sensor (+1k3 code)
|
||||
#undef USE_NOVA_SDS // Add support for SDS011 and SDS021 particle concentration sensor (+0k7 code)
|
||||
#undef USE_SERIAL_BRIDGE // Add support for software Serial Bridge (+0k8 code)
|
||||
#undef USE_TUYA_DIMMER // Add support for Tuya Serial Dimmer
|
||||
|
||||
// Power monitoring sensors -----------------------
|
||||
#undef USE_PZEM004T // Add support for PZEM004T Energy monitor (+2k code)
|
||||
#undef USE_PZEM_AC // Add support for PZEM014,016 Energy monitor (+1k1 code)
|
||||
#undef USE_PZEM_DC // Add support for PZEM003,017 Energy monitor (+1k1 code)
|
||||
#undef USE_MCP39F501 // Add support for MCP39F501 Energy monitor as used in Shelly 2 (+3k1 code)
|
||||
|
||||
// -- Low level interface devices -----------------
|
||||
#undef USE_IR_REMOTE // Send IR remote commands using library IRremoteESP8266 and ArduinoJson (+4k code, 0k3 mem, 48 iram)
|
||||
#undef USE_WS2812 // WS2812 Led string using library NeoPixelBus (+5k code, +1k mem, 232 iram) - Disable by //
|
||||
#undef USE_ARILUX_RF // Add support for Arilux RF remote controller (+0k8 code, 252 iram (non 2.3.0))
|
||||
#undef USE_SR04 // Add support for HC-SR04 ultrasonic devices (+1k code)
|
||||
#undef USE_HX711 // Add support for HX711 load cell (+1k5 code)
|
||||
#undef USE_RF_FLASH // Add support for flashing the EFM8BB1 chip on the Sonoff RF Bridge. C2CK must be connected to GPIO4, C2D to GPIO5 on the PCB (+3k code)
|
||||
#undef USE_TX20_WIND_SENSOR // Add support for La Crosse TX20 anemometer (+2k code)
|
||||
#undef USE_RC_SWITCH // Add support for RF transceiver using library RcSwitch (+2k7 code, 460 iram)
|
||||
|
||||
#endif // _USER_CONFIG_OVERRIDE_H_
|
||||
114
override_sonoff.h
Normal file
114
override_sonoff.h
Normal file
@ -0,0 +1,114 @@
|
||||
#ifndef _USER_CONFIG_OVERRIDE_H_
|
||||
#define _USER_CONFIG_OVERRIDE_H_
|
||||
|
||||
// force the compiler to show a warning to confirm that this file is inlcuded
|
||||
#warning **** user_config_override.h: Using settings override with flavour "sonoff"
|
||||
|
||||
/*********************************************************************************************\
|
||||
* SECTION 1
|
||||
* - After initial load any change here only take effect if CFG_HOLDER is changed too
|
||||
\*********************************************************************************************/
|
||||
|
||||
// -- Wifi ----------------------------------------
|
||||
|
||||
#undef STA_SSID1
|
||||
#define STA_SSID1 "{{ env "WIFI_SSID" }}" // [Ssid1] Wifi SSID
|
||||
|
||||
#undef STA_PASS1
|
||||
#define STA_PASS1 "{{ env "WIFI_PASS" }}" // [Password1] Wifi password
|
||||
|
||||
// -- Ota -----------------------------------------
|
||||
#undef OTA_URL
|
||||
#define OTA_URL "{{ env "OTA_URL" }}" // [OtaUrl]
|
||||
|
||||
// -- MQTT ----------------------------------------
|
||||
#undef MQTT_HOST
|
||||
#define MQTT_HOST "{{ env "MQTT_HOST" }}" // [MqttHost]
|
||||
|
||||
#undef MQTT_USER
|
||||
#define MQTT_USER "{{ env "MQTT_USER" }}" // [MqttUser] MQTT user
|
||||
|
||||
#undef MQTT_PASS
|
||||
#define MQTT_PASS "{{ env "MQTT_PASS" }}" // [MqttPassword] MQTT password
|
||||
|
||||
// -- MQTT topics ---------------------------------
|
||||
// %topic% token options (also ButtonTopic and SwitchTopic)
|
||||
#undef MQTT_TOPIC
|
||||
#define MQTT_TOPIC "unconfigured" // [Topic] (unique) MQTT device topic, set to 'PROJECT "_%06X"' for unique topic including device MAC address
|
||||
|
||||
// -- MQTT - Telemetry ----------------------------
|
||||
#undef TELE_PERIOD
|
||||
#define TELE_PERIOD 30 // [TelePeriod] Telemetry (0 = disable, 10 - 3600 seconds)
|
||||
|
||||
// -- Time - Up to three NTP servers in your region
|
||||
#undef NTP_SERVER1
|
||||
#define NTP_SERVER1 "ptbtime1.ptb.de" // [NtpServer1] Select first NTP server by name or IP address (129.250.35.250)
|
||||
|
||||
#undef NTP_SERVER2
|
||||
#define NTP_SERVER2 "ptbtime2.ptb.de" // [NtpServer2] Select second NTP server by name or IP address (5.39.184.5)
|
||||
|
||||
// -- Location ------------------------------------
|
||||
#undef LATITUDE
|
||||
#define LATITUDE 53.58328 // [Latitude] Your location to be used with sunrise and sunset
|
||||
|
||||
#undef LONGITUDE
|
||||
#define LONGITUDE 9.71719 // [Longitude] Your location to be used with sunrise and sunset
|
||||
|
||||
/*********************************************************************************************\
|
||||
* END OF SECTION 1
|
||||
*
|
||||
* SECTION 2
|
||||
* - Enable a feature by removing both // in front of it
|
||||
* - Disable a feature by preceding it with //
|
||||
\*********************************************************************************************/
|
||||
|
||||
// -- MQTT - Domoticz -----------------------------
|
||||
#undef USE_DOMOTICZ // Enable Domoticz (+6k code, +0.3k mem)
|
||||
|
||||
// -- MQTT - Home Assistant Discovery -------------
|
||||
#undef USE_HOME_ASSISTANT // Enable Home Assistant Discovery Support (+2k code)
|
||||
|
||||
// -- HTTP ----------------------------------------
|
||||
#undef USE_EMULATION // Enable Belkin WeMo and Hue Bridge emulation for Alexa (+16k code, +2k mem)
|
||||
|
||||
// -- Time ----------------------------------------
|
||||
#undef USE_TIMERS // Add support for up to 16 timers (+2k2 code)
|
||||
|
||||
// -- Rules ---------------------------------------
|
||||
#undef USE_RULES // Add support for rules (+4k4 code)
|
||||
|
||||
// -- Internal Analog input -----------------------
|
||||
#define USE_ADC_VCC // Display Vcc in Power status. Disable for use as Analog input on selected devices
|
||||
|
||||
// -- One wire sensors ----------------------------
|
||||
// WARNING: Select none for default one DS18B20 sensor or enable one of the following two options for multiple sensors
|
||||
//#define USE_DS18x20_LEGACY // Optional for more than one DS18x20 sensors with dynamic scan using library OneWire (+1k5 code)
|
||||
#undef USE_DS18x20 // Optional for more than one DS18x20 sensors with id sort, single scan and read retry (+1k3 code)
|
||||
// #define W1_PARASITE_POWER // If using USE_DS18x20 then optimize for parasite powered sensors
|
||||
|
||||
// -- Serial sensors ------------------------------
|
||||
#undef USE_MHZ19 // Add support for MH-Z19 CO2 sensor (+2k code)
|
||||
#undef USE_SENSEAIR // Add support for SenseAir K30, K70 and S8 CO2 sensor (+2k3 code)
|
||||
#undef USE_PMS5003 // Add support for PMS5003 and PMS7003 particle concentration sensor (+1k3 code)
|
||||
#undef USE_NOVA_SDS // Add support for SDS011 and SDS021 particle concentration sensor (+0k7 code)
|
||||
#undef USE_SERIAL_BRIDGE // Add support for software Serial Bridge (+0k8 code)
|
||||
#undef USE_TUYA_DIMMER // Add support for Tuya Serial Dimmer
|
||||
|
||||
// Power monitoring sensors -----------------------
|
||||
#undef USE_PZEM004T // Add support for PZEM004T Energy monitor (+2k code)
|
||||
#undef USE_PZEM_AC // Add support for PZEM014,016 Energy monitor (+1k1 code)
|
||||
#undef USE_PZEM_DC // Add support for PZEM003,017 Energy monitor (+1k1 code)
|
||||
#undef USE_MCP39F501 // Add support for MCP39F501 Energy monitor as used in Shelly 2 (+3k1 code)
|
||||
|
||||
// -- Low level interface devices -----------------
|
||||
#undef USE_IR_REMOTE // Send IR remote commands using library IRremoteESP8266 and ArduinoJson (+4k code, 0k3 mem, 48 iram)
|
||||
#undef USE_WS2812 // WS2812 Led string using library NeoPixelBus (+5k code, +1k mem, 232 iram) - Disable by //
|
||||
#undef USE_ARILUX_RF // Add support for Arilux RF remote controller (+0k8 code, 252 iram (non 2.3.0))
|
||||
#undef USE_SR04 // Add support for HC-SR04 ultrasonic devices (+1k code)
|
||||
#undef USE_HX711 // Add support for HX711 load cell (+1k5 code)
|
||||
#undef USE_RF_FLASH // Add support for flashing the EFM8BB1 chip on the Sonoff RF Bridge. C2CK must be connected to GPIO4, C2D to GPIO5 on the PCB (+3k code)
|
||||
#undef USE_TX20_WIND_SENSOR // Add support for La Crosse TX20 anemometer (+2k code)
|
||||
#undef USE_RC_SWITCH // Add support for RF transceiver using library RcSwitch (+2k7 code, 460 iram)
|
||||
|
||||
|
||||
#endif // _USER_CONFIG_OVERRIDE_H_
|
||||
1
requirements.txt
Normal file
1
requirements.txt
Normal file
@ -0,0 +1 @@
|
||||
platformio
|
||||
Loading…
Reference in New Issue
Block a user